Tack Dry Solder Mask Setup Option

The Apply Solder Mask >Tack Dry Solder Mask node of the Process Options Editor provides the setup options Panel Drying Time.

Panel Drying Time

By default, the time to dry the solder mask after application (see Wet Film Solder Mask) is specified by the cost model variable defaultPanelDryTime (120 seconds in starting point Digital Factories). With the setup option Panel Drying Time (defined by the Apply Solder Mask >Tack Dry Solder Mask node of the Process Options Editor), users can override the default on a per-part basis.